Fiberglass Wooden Boat
fiberglass wooden boat
If you are planning to fiberglass an old wooden boat to restore it, bear in mind that the fiberglass resin will seal into the wood any moisture, bacteria or mold it contains. these things will eventually cause the wood to rot inside the fiberglass shell, leaving it visually acceptable but structurally unsound.. The product cures clear on fiberglass, wood, or metal. it is able to be sanded for multiple coats. as a user-friendly product and one of the best fiberglass resin for boats, it mixes easily and set up well to prevent sagging on a vertical surface. it is considered a medium-viscosity product that contains wax for curing.. Fiberglass is a popular material used in boats, cars and recreational vehicles due to it being lightweight and a good weather protectant. fiberglass will bind with the wood and give it protection from water. the following steps will cover the tools, materials and application techniques needed in order to apply fiberglass over wood.. 
fiberglass wooden boat Technique is to simply fiberglass over the wood hull of the boat, essentially sealing out the water and adding the structural strength of the fiberglass to the hull. but this has its downside. on an old boat the wood in the boat is wet. because of the damp, rot has probably infected the wood even though the boat looks sound and is seaworthy.. With fiberglass boat building, however, the major components of the boat – the hull, deck, liner, and large parts like consoles—are molded from fiberglass. usually, this means starting with a female mold. the mold is first sprayed with gelcoat, then fiberglass cloth is applied, and then resin is used to saturate or “wet out” the fiberglass..
0 comments:
Post a Comment