Sailboat Design Parameters
sailboat design parameters
These parameters are subject to change as the following preliminary design parameter estimation is carried out. preliminary design parameter estimation typical fast upwind sailing occurs at froude number r 0.4 v f gl ≡== v is the boat speed, g is the acceleration due to gravity and l is the waterline length.. The ability to look at the lines of a boat and immediately see whether the design has merit requires a practiced eye. this is mostly a matter of understanding what the vessel's lines represent, and then of passing judgment based on what has been observed to be a good design in the past. to the. Power boats: boat design parameters, part 2. previous page: boat design parameters, part 1 the speed/length ratio is used to group boats into three categories used in designing the boat:. low speed - speed/length ratio of up to 1.6 (remember, hull speed is achieved at 1.34); medium speed - speed/length ratio between 1.6 and 3; high speed - boats capable of planing, speed/length ratio above 3. 
sailboat design parameters Here is a list of definitions for the various parameters used to describe boats. as a general rule, parameters and ratios listed on the m. b. marsh design site are for the boat at its fully loaded design displacement, including full tanks, full crew, and typical cargo. the one exception is the light-ship displacement figure, which is (roughly) the weight of the fully fitted out, but unloaded. If you want to use sailboat for long travel you need to know the wind parameters for any side that you will be. knowing the wind wind parameters you can predict the best optimum path to achieve the goal..
0 comments:
Post a Comment