How To Paint Lower Unit On Boat
how to paint lower unit on boat
Painting an outboard lower unit why you need to check your anodes/zincs if you leave your boat in the boatingthecarolinas 113,724 views. 4:28. lower unit seal replacement pt 3 of. Sand all surfaces to be painted with 350- to 400-grit sandpaper. use a power sander on broad surfaces, but you might need to hand-sand hard-to-reach spots such as around the bracket and lower unit. wipe all surfaces with the quantum sr-002 surface cleaner and a lint-free rag, then immediately wipe it clean.. In addition, there was the usual paint missing from the tip of the skeg, the result of abrasion with sandy bottoms over the years. i decided to fill in the holes and repaint the lower unit. materials and procedure. three specialty products are needed to make this repair: epoxy to fill the holes, special primer paint, and oem matching topcoat paint..
how to paint lower unit on boat Has anyone had any success in keeping lower unit paint on for more than a few trips to the lake. on my rude ram lower unit the platinum silver paint lasts for only a few trips before looking terrible. i then clean with alcohol, scuff with light paper, and re-paint with factory omc paint and it's good for another few trips..
0 comments:
Post a Comment